
The steering wheel is the part of the car you touch most. A cover can make it warmer in winter, cooler in summer, easier to grip, softer on the hands, or simply nicer to look at, and it hides a wheel that has gone shiny or worn. It only works if it is the right size and fitted so it never moves, because a cover that slips on the rim is worse than no cover at all. This guide explains why people fit one, how to measure your wheel, the main materials, the two ways covers fit, and how to fit one so it stays put.
Why fit a steering wheel cover
There are a few good reasons, and most people have more than one.
- Grip. A wheel that has worn smooth and shiny over the years can feel slippery, especially with damp or cold hands. A cover gives a fresh surface to hold.
- Comfort. A padded or textured cover is softer on the hands over a long drive, and a thicker rim suits some people's grip better.
- Heat and cold. A bare wheel can be painfully hot after the car has stood in the sun, and freezing on a winter morning. A cover takes the edge off both.
- Protection. A cover protects a wheel that is still in good condition from wear, rings, hand cream and sun.
- Looks. A worn wheel spoils an otherwise tidy interior, and a cover can match the seats, add a colour or make the car feel more your own.
What a cover must never do
When a cover is not the answer
A cover is not a repair. If the wheel feels loose on its column, or the rim or a spoke is cracked, have a garage look at it: the MOT steering checks include movement between the wheel and the column and a rim or spokes that are fractured or loose. A cover cannot fix a slippery feel caused by hand cream or a grubby rim either, which a wipe with a damp cloth usually sorts out.
The law requires a driver to be able to keep proper control of the vehicle. The Road Vehicles (Construction and Use) Regulations 1986 say no one may drive in a position where they cannot have proper control of it, and the Highway Code asks you to drive with both hands on the wheel where possible. A cover that turns on the rim, bunches up or makes the wheel too fat to hold firmly works against both. So the rules for a cover are simple: it must fit tightly, it must not move, it must sit on the rim only, and it must never cover the centre of the wheel, where the driver's airbag is. The car's handbook shows the airbag, and anything over that centre pad could get in its way or be thrown at the driver if it opened.
Measuring your wheel
Covers are sold to fit a range of wheel sizes, and the description or size chart says which. A cover that is too big will turn on the rim; one that is too small will not go on, or will strain and split at the seams. Measure your own wheel before you choose. It takes two minutes with a tape measure and a piece of string.
The diameter
With the car parked and the wheels straight, measure straight across the steering wheel from the outside edge on one side to the outside edge on the other, through the centre. Do it side to side rather than top to bottom, because many wheels are flattened at the bottom. Write it down in centimetres, because most size charts use them.
The thickness of the rim
Wrap a piece of string or a soft tape once round the rim where you normally hold it, and measure the length. This is the rim's circumference. Rims vary more than you might think, and a very thick, sporty rim may need a cover made for it even if the diameter is a common one. Not every chart gives this, but if yours does, check it.
The shape
Look at the shape of the wheel. Many cars now have a wheel with a flat bottom, sometimes called D-shaped. A stretch cover made for a round wheel can bunch up or pull away along the flat part. If your wheel is flat-bottomed, look for a cover described as made for that shape.
Vans and older cars
Do not assume a van's wheel is the same size as a car's, or that your next car's wheel is the same as your last. Measure the wheel you have. The steering wheel covers range gives sizes in each description, so you can compare your measurements directly.
Buttons and paddles
Many steering wheels have buttons on the spokes for the phone, the radio and cruise control, and some have paddles behind for the gears. A cover goes round the rim between the spokes, so these stay clear, but check that its edge will not sit over any of them, and that you can still reach and press every one.
Leather and PU leather
Leather and leather-look covers are the closest to what many cars have from the factory. They look smart, feel firm and suit almost any interior.
Real leather
Real leather is supple, breathes a little so your hands sweat less, and softens and darkens with use. It needs an occasional wipe with a damp cloth and, if it starts to dry out, a leather conditioner used as its instructions say.
PU leather
PU leather, sometimes called synthetic or faux leather, is a plastic coating made to look and feel like leather. It is usually cheaper and wipes clean very easily. It does not breathe in the same way, so it can feel a little warmer and more slippery in hot weather, and good-quality PU with a texture or perforations grips better.
Texture and perforations
Many leather and PU covers are perforated with small holes, or have a textured or stitched pattern where the hands go. Both help the grip and let warm hands breathe. Smooth, shiny finishes look sleek but give less grip, especially when it is warm.
Colour and stitching
Covers come in plain black, which suits almost any car, and in colours and with contrasting stitching. Pick out a colour that is already in the car, such as the stitching on the seats or a trim panel, and the cover looks as if it belongs there. A light colour shows marks from hands sooner, so it needs wiping more often. For a sportier look, the carbon fibre look page has covers and trims in that finish.
In a hot car
Dark leather and PU get hot in direct sun, just as a bare wheel does. A cover still helps, but a windscreen sun shade when you park does more. See the leather steering wheel covers, and the luxury leather page if you want the gear knob and seats to match.
Suede and microfibre
Suede-feel covers, usually made from a microfibre that imitates suede, have a soft, brushed surface. They are the covers fitted to many sporty cars' wheels from the factory, and they are chosen for one thing above all: grip.
Grip and feel
The brushed surface holds the hand well, even when it is warm, and it does not get as hot or as cold to the touch as leather. People who find a leather wheel slippery often prefer suede.
On a long drive
Because the surface holds the hand, a suede-feel cover lets you keep a firm hold without squeezing, which many people find less tiring on a long motorway drive. It also suits a thick rim or a flat-bottomed wheel, the shape many sporty wheels already have.
Looking after it
Suede-feel covers pick up oils from the hands, and over time the pile can flatten and go shiny where you hold it. Brush it occasionally with a soft brush to lift the pile, and clean marks with a barely damp microfibre cloth rather than soaking it. Avoid hand cream just before you drive. The suede steering wheel covers range has them in several colours.
Fluffy and winter covers
Fluffy and plush covers are soft, warm and fun. They come in every colour, and they are often the first thing someone fits when they want a car to feel their own.
Warmth
A thick, plush cover makes a real difference on a frosty morning, when a bare wheel can be painfully cold before the heater gets going. It is a cosy alternative to wearing gloves to drive. If you do wear gloves, make sure they still let you hold the wheel firmly and use the controls: the Highway Code asks you to make sure your clothing does not stop you using the controls in the correct manner.
Things to check
- Thickness. A fluffy cover makes the rim noticeably fatter. That suits large hands but can make it harder for small hands to grip firmly. If you can, choose a dense, shorter pile.
- Grip. Long fluff can feel as though it moves under your hands even when the cover underneath is tight. Check that the cover itself is a firm fit on the rim.
- Cleaning. Fluffy covers collect dust and hand marks. Check whether the cover can come off to be washed, and how.
- The buttons. A thick pile can creep over the edge of the spoke buttons. Check you can still press them.
A heated steering wheel
If your car has a heated steering wheel, any cover slows down the warmth reaching your hands, and a thick fluffy one slows it most. It may be better to leave the wheel bare in winter and use the heater as the car's maker intended.
The fluffy steering wheel covers range and the pink and cute page have the brightest. For more winter warmth, heated seat covers sit well alongside a fluffy wheel, and the winter car kit guide goes through the rest.
Stitch-on or stretch-on
Covers fit in one of two ways, and the choice is between a quick job and a perfect one.
Stretch-on covers
A stretch-on cover has a tight band of rubber or elastic material on its inside edge. You stretch it over the rim and it grips by tension. It goes on in a few minutes, comes off for cleaning or when you sell the car, and needs no tools. Most covers are made this way. Their weak point is size: because the fit depends entirely on the stretch, the cover must match your wheel's measurements, or it will be too loose to stay put or too tight to go on.
Stitch-on covers
A stitch-on cover is a strip of leather or suede that wraps round the rim, with holes along both edges. You lace the two edges together round the inside of the rim with a needle and thread, usually supplied. Done carefully, it looks as if it came with the car and cannot move at all, because it is stitched tight round the rim. It also suits wheels that stretch covers fit badly, such as an unusually thick rim. The catch is time and patience: it is a slow job, it needs to be done neatly to look right, and it is not easily removed.
Lacing a stitch-on cover
Most stitch-on covers come with a needle, a length of thread and instructions showing the stitch, usually a simple crossing stitch. Centre the cover on the rim with its seam on the inside, where your fingers rest, and hold it in place with a few short strips of tape. Work the thread through the holes on each edge in turn, pulling each stitch tight before you make the next. At each spoke the cover has a cut-out: fold the edges neatly round the spoke and carry on. When you are back where you started, tie the thread off securely and tuck the end under the cover.
Which to choose
If you want a quick change, or plan to swap covers, choose stretch-on. If you want the neatest finish on a car you are keeping, and do not mind an evening's work, stitch-on is worth it.
Fitting it so it stays put
Fit a cover with the car parked, the engine off and the front wheels pointing straight ahead, so the steering wheel is level and you can find the top.
A stretch-on cover, step by step
- Warm the cover. Leave it somewhere warm for a while first, such as indoors. A warm cover is more flexible and much easier to stretch. In winter, fit it in a warm garage or after a drive, not on a frozen morning.
- Clean the wheel. Wipe the rim with a damp cloth and let it dry, so there is nothing slippery between wheel and cover.
- Start at the top. Hook the cover over the top of the rim, with any seam or marker where it should be.
- Work down both sides. Push the cover down the left and right sides together, a little at a time, keeping it even.
- Finish at the bottom. The last part is the tightest. Pull the bottom of the cover towards you and roll it over the rim, using the palms of your hands rather than your fingertips.
- Straighten it. Run your hands round the rim to smooth out any twist, so the seam sits evenly on the inside of the wheel all the way round.
Check it before you drive
Grip the wheel as you would when driving and try to twist the cover round the rim, in both directions, at several points. It should not move at all. If it does, it is too big for your wheel, and it should come off. Then check that the cover sits on the rim only, is clear of the centre pad where the airbag is, and does not cover any buttons. Turn the wheel from lock to lock with the engine running to make sure nothing catches on the stalks or the dashboard.
Check it again
Rubber and leather can move slightly as they settle, and as the weather changes from hot to cold. Try the twist test again after a few days, and whenever the seasons change. A cover that has started to move needs refitting or replacing, not putting up with.
Taking a cover off
To take a stretch-on cover off, start at the bottom, roll it towards you and work up both sides. Like fitting, it is easier when the cover is warm. A stitch-on cover comes off by cutting the thread on the inside of the rim, carefully, with the blade pointing away from the wheel so it does not mark it.
Matching pieces
Once the wheel is done, the gear knob and gear stick covers and handbrake covers finish the driver's area in the same material, and seat belt pads add comfort where the belt crosses the shoulder.
Questions
Is it legal to use a steering wheel cover?
The MOT inspection manual's steering checks do not mention covers. What the law does require is that you can keep proper control of the vehicle, so a cover must fit tightly and never move. It should also never cover the airbag in the centre of the wheel.
What size steering wheel do I have?
Measure across the wheel from outside edge to outside edge, side to side through the centre, in centimetres. Then compare it with the size chart in the cover's description.
Will a cover fit a flat-bottomed wheel?
A stretch cover made for round wheels may bunch or pull away along the flat part. Look for one made for D-shaped wheels, or choose a stitch-on cover, which follows the rim's shape.
Why does my cover slip?
Usually because it is too big for the wheel, or it has stretched with heat and use. A cover that moves should be replaced with one in the right size. Do not drive with a cover that turns on the rim.
How do I clean a steering wheel cover?
Wipe leather and PU with a damp microfibre cloth, brush a suede-feel cover to lift the pile, and check whether a fluffy cover can come off to be washed. Let any cover dry fully before you drive, so it grips.
Which material grips best in hot weather?
Suede-feel and perforated or textured leather covers usually grip better than smooth, shiny finishes when your hands are warm. Shading the windscreen when you park keeps any wheel cooler.
Where to go next
Measure your wheel, then see the steering wheel covers, or the whole of the driver's area for gear knob covers, sun visor extenders and more. A cover in the right colour makes a good present, and the gifts for drivers page has others. Delivery is included in every price and tracked to your door. Other guides that help:
- Choosing car seat covers: matching the seats to the wheel
- Choosing car sun shades: keeping the wheel cool when the car is parked
- Cute and pink car accessories: fluffy covers and the pieces that go with them
- Gifts for drivers: a steering wheel cover and other presents


